Electric Passenger Tricycle
Product Overview
The HX-PT03 Electric Passenger Tricycle is engineered for commercial passenger transport in high-density urban transit, tourist zones, and municipal feeder routes. Built on a reinforced high-tensile steel frame with an integrated heavy-duty rear axle, it supports a payload capacity of up to 450 kg (driver + 4 to 6 passengers). Powered by a brushless differential motor paired with a programmable controller, this platform delivers dependable low-end torque for urban stop-and-go traffic and sustained hill climbing. Available in Complete Built-Up (CBU) or Semi-Knocked-Down (SKD) formats, complying with regional international import standards for global fleet deployment.
Reinforced Chassis:
Electrophoretically treated and powder-coated Q235 carbon steel frame engineered to withstand torsional stress under full passenger load on uneven road surfaces.
High-Torque Differential Motor:
Permanent magnet synchronous motor (PMSM) paired with a heavy-duty reduction gearbox axle, providing high starting torque without thermal overload.
Dual-Circuit Braking System:
Combined hydraulic front disc brake and rear mechanical drum brakes with hand-operated mechanical parking brake for vehicle safety on inclines.
Configurable Power Storage:
Factory-compatible with maintenance-free Lead-Acid battery banks (60V/72V 58Ah) or modular LiFePO4 (Lithium Iron Phosphate) packs equipped with a Battery Management System (BMS), tailored for tropical or temperate climate operations.
Ergonomic Passenger Cabin:
Weather-resistant canvas or rigid steel canopy options, padded high-density foam seating with marine-grade vinyl upholstery, and steel grab rails.
Product Structure & Components
Chassis & Frame Assembly:
Automated robotic MIG welding of cold-rolled steel tubing; subjected to multi-stage acid pickling, zinc phosphating, and electrostatic powder coating to prevent corrosion in humid coastal or tropical environments.
Drive Train:
Rear axle features an integrated gear reduction differential housed in ductile cast iron, transmitting power directly via heavy-duty half-shafts to eliminate chain-slip and maintenance overhead.

Electrical Architecture:
Centralized wiring harness with waterproof automotive-grade connectors (IP67 rated), copper core cables, and an independent DC-DC converter (60V/72V to 12V) for lighting and instrumentation.
Control Unit:
Programmable sine-wave controller managing regenerative braking, phase current limiting, and thermal protection cutoff to safeguard motor winding life.
Technical Specifications
|
Technical Parameter |
Specification Details |
|
Model Designation |
HX-PT03 |
|
Motor Type |
Brushless DC Permanent Magnet Differential Motor |
|
Rated Motor Power |
1500W / 2000W / 3000W (Customizable by market requirement) |
|
System Voltage |
60V / 72V |
|
Battery Options |
Lead-Acid (60V/72V 58Ah) or LiFePO4 Lithium Battery (100Ah) |
|
Controller |
24-Tube Intelligent Sine Wave Controller (Anti-thermal runaway) |
|
Max Speed |
25 km/h – 45 km/h (Region-adjustable via software limit for regulatory compliance) |
|
Range per Charge |
60 km – 110 km (Depending on load, terrain, and battery chemistry) |
|
Charging Time |
6–8 hours (Lead-Acid) / 4–5 hours (LiFePO4 with smart fast charger) |
|
Payload Capacity |
450 kg (Excluding vehicle kerb weight) |
|
Seating Capacity |
Driver + 4 Passengers (Standard rear bench layout) |
|
Braking System |
Front Hydraulic Disc Brake + Rear Heavy-Duty Drum Brake |
|
Suspension |
Front Hydraulic Telescopic Forks + Rear Leaf Springs with Hydraulic Dampers |
|
Tire Size |
3.00-12 or 4.00-12 Heavy-Duty Commercial Tubeless Tires |
|
Climbing Gradeability |
20 degrees – 25 degrees fully loaded |
|
Dimensions (L x W x H) |
2750 mm x 1050 mm x 1780 mm |
|
Vehicle Kerb Weight |
320 kg (Without battery) |
Applications & Regional Adaptation
Urban Feeder Transit:
Last-mile passenger transport connecting subway stations and residential hubs in metropolitan environments.
Campus & Industrial Mobility:
Personnel transport across large manufacturing campuses, university grounds, and exhibition centers.
Tourist Resorts & Eco-Parks (Europe/North America focus):
Low-emission, low-noise lithium-powered guest shuttling within heritage sites, golf courses, and hospitality complexes where strict noise and emission caps apply.
High-Density Urban Fleets (Southeast Asia/Latin America focus):
Heavy-duty, high-torque passenger transport designed to withstand frequent stop-and-go patterns, unpaved or wet terrain, and sustained passenger loads.
Quality Control
Raw Material Verification:
Ultrasonic testing and spectroscopic analysis of incoming steel tubes to verify wall thickness and tensile yield strength.
Welding Integrity Inspection:
100 percent visual inspection combined with random ultrasonic weld penetration tests on high-stress frame joints.
Electrical Burn-In Testing:
Controllers and motor assemblies undergo 4-hour full-load thermal chamber testing prior to final chassis assembly.
Finished Vehicle Testing:
Every unit undergoes dynamic roller-bench testing for brake efficiency, speedometer accuracy, motor noise, and electrical circuit continuity before packaging.
Customization & OEM Solutions
Powertrain Adaptation: Custom motor winding and controller programming to meet strict local municipal speed caps (e.g., restricted to 25 km/h for European L-category guidelines or up to 45 km/h for emerging markets).
Battery Compartment Engineering: Flexible battery tray sizing configured for specific client-sourced battery brands or chemistry preferences (LiFePO4 vs. Lead-Acid).
Body & Livery Branding: Custom exterior body panel paint codes, laser-cut steel branding on side panels, custom canopy canvas printing, and branded digital instrument cluster boot screens.
Supply Format Options: Delivered as Complete Built-Up (CBU) units for direct deployment, or Semi-Knocked-Down (SKD / CKD) crated configurations to optimize container freight costs and local import tariff structures.
Packaging & Shipping
CBU Packaging:
Reinforced steel skeletal crate with exterior corrugated protection and waterproof shrink-wrapping (2 units per 20ft container / 5 units per 40HQ container).
SKD/CKD Packaging:
Modular plywood export crates designed to maximize container space utilization (up to 18 to 24 units per 40HQ container, minimizing freight cost per vehicle).
Logistics Support:
Factory loading managed directly at our container yard with professional lashing, blocking, and bracing documentation provided for customs clearance.
FAQ

Request a Quote
To receive an official quotation including FOB/CIF freight pricing, SKD container packing calculations, or OEM customization specifications for your market, contact our engineering sales team directly via hxmotos.com.







