Electric Cargo Tricycle

Product Overview

 

The HX-CT3000 series is engineered for commercial last-mile delivery, industrial logistics, and municipal utility fleets. Built on a 4mm cold-rolled structural steel chassis and driven by a 2000W brushless differential motor, this cargo tricycle delivers a rated payload of 500kg to 800kg. It integrates heavy-duty rear axle reduction gears and hydraulic disc braking to maintain stability and stopping power under maximum load across urban streets and industrial campuses.

 

 
First 1234567 Last 1/9
 
Key Features

Reinforced Structural Chassis:

Q235B carbon steel tubing joined via robotic MIG welding, finished with cathodic electrophoretic deposition (ED) anti-rust primer and powder coat.


High-Torque Differential Drive:

Brushless DC motor paired with a high-reduction rear axle, optimized for gradeability up to 20% incline under full load.

Dual-Circuit Braking System:

Front hydraulic disc brake combined with rear hydraulic drum brakes and an independent mechanical handbrake.

Modular Cargo Bed:

Interchangeable platform options including flatbed, high-wall drop-side steel panels, and insulated delivery boxes.

Thermal-Managed Batteries:

60V/72V configurations (Lithium LiFePO4 or Deep-Cycle Lead-Acid) featuring BMS short-circuit and over-temperature protection.

 

Product Structure & Components

 

Chassis & Frame:

Main beams validated via finite element analysis (FEA) stress testing to prevent fatigue failure under dynamic loads.

Control Unit:

Programmable vector controller featuring regenerative braking, thermal throttling, and over-current protection.

1200w Heavy Electric Cargo Tricycle

Drive Axle Assembly:

Cast-steel differential housing with precision-machined bevel gears, sealed against dust and moisture ingress (IP65 rated).

Steering & Front End:

Forged alloy steel steering stem and triple-tree clamp engineered to handle high static steering torque.

 

 

Technical Specifications

 

 

Parameter

Specification

Model

HX-CT3000

Payload Capacity

600 kg (Standard) / 800 kg (Heavy-Duty Option)

Motor Type

Brushless Permanent Magnet Synchronous Motor (PMSM)

Rated / Peak Power

1500W / 3000W

Max Speed

25 km/h – 45 km/h (Configurable to local regulations)

Battery Options

72V 100Ah LiFePO4 / 72V 120Ah Lead-Acid

Range per Charge

60 km – 100 km (Dependent on load and terrain)

Charging Time

6 - 8 hours (Standard 10A/20A off-board charger)

Transmission

Rear axle with differential gearbox and reverse gear

Brake System

Front hydraulic disc + Rear hydraulic drum + Parking brake

Suspension

Front telescopic hydraulic fork + Rear heavy-duty leaf springs

Cargo Bed Dimensions

1600mm x 1100mm x 500mm (Customizable)

Tire Specifications

Front: 3.50-12 / Rear: 4.00-12 Heavy-duty pneumatic commercial tires

 

Applications

Last-Mile Parcel Delivery:

Courier fleets operating in high-density urban zones to reduce per-stop delivery costs.

Intra-Plant Material Handling:

Moving components, tooling, and scrap between production bays in large manufacturing facilities.

Municipal Sanitation & Maintenance:

Transporting groundskeeping equipment, waste bins, and tools across public parks and facilities.

Cold-Chain & Food Logistics:

Configured with refrigerated or insulated lockable boxes for fresh food distribution.

 

 
 
Customization & OEM Solution
01.

Chassis Modification:

Custom cargo bed dimensions, stake-side heights, and mounting brackets for specialized equipment.

02.

Powertrain Tuning:

Controller firmware programming aligned with regional speed thresholds (e.g., EPAC compliance in Europe, Class 2/3 in North America).

03.

Electrical Architecture:

Integration of GPS/4G fleet tracking telematics, custom auxiliary voltage outputs, and solar-assist roof panels.

04.

Brand Integration:

RAL color code powder matching, laser-etched VIN plates, and waterproof vinyl graphics.

 

Quality Control
 

Manufacturing follows ISO 9001 protocols across production stages: 

Raw Material Inspection:

Ultrasonic testing and thickness gauges verify carbon steel tube wall tolerances prior to cutting.

Welding Verification:

Seams undergo visual inspection and magnetic particle testing (MT) to ensure structural integrity.

Component Burn-In:

100% of controllers and motors undergo thermal load testing on dynamometer test benches.

End-of-Line Testing:

Roller-bench tests verify braking efficiency, speedometer calibration, electrical draw, and noise levels.

 

Packaging & Shipping

Packaging Options

 

SKD (Semi-Knocked Down):

Steel frame crating combined with heavy-duty corrugated cartons (approx. 24 units per 40HQ container).

 

CKD (Completely Knocked Down):

Bulk component packing for local assembly operations.

 

Port Logistics:

Loaded directly from facility warehouses into 20GP or 40HQ containers, secured with steel lashing straps. FOB / CIF shipping terms available from major Chinese ports.

 

FAQ

 

 

Q: What is the verified payload capacity under continuous commercial operation?

A: The standard model is rated for 600kg, and the heavy-duty configuration handles up to 800kg based on safety margins tested under 1.5x static overload conditions. Exceeding 800kg consistently will accelerate tire wear and reduce motor lifespan.

Q: Can top speed be programmed to comply with local street-legal regulations?

A: Yes. Programmable vector controllers adjust maximum speeds prior to shipment, such as restriction to 25 km/h for EPAC compliance or customized up to 45 km/h for industrial zones.

Q: What is the expected cycle life of the LiFePO4 battery pack and cold-weather performance?

A: The LiFePO4 pack is rated for 2,500 charge-discharge cycles at 80% Depth of Discharge (DoD) at nominal temperatures. For operations below 0°C, optional BMS-integrated heating films can be specified for safe low-temperature charging.

Q: What spare parts availability is guaranteed for fleet maintenance?

A: High-wear components—including brake pads, controllers, throttles, tires, and differential gears—are stocked. A standard 3% to 5% spare parts allocation is recommended alongside initial bulk orders.

Q: What is the minimum order quantity (MOQ) for custom OEM branding?

A: The MOQ for custom RAL frame colors and private-label branding is 10 units (one 20GP container load equivalent when mixed with standard models).

Q: What certifications do the manufacturing facility and vehicles hold?

A: Production operates under ISO 9001 standards. Key components carry CE, RoHS, and UN38.3 transport certifications, with full technical dossiers provided for regional homologation.

 

modular-1
Request a Quote

Provide the following requirements to receive a detailed quotation including FOB/CIF shipping estimates and sample terms:
Required payload capacity and cargo bed dimensions
Battery preference (LiFePO4 vs. Lead-Acid) and estimated daily mileage
Destination port and initial order volume

As one of the most professional electric cargo tricycle manufacturers and suppliers in China, we offer a wide range of products with superior quality. Please feel free to wholesale advanced electric cargo tricycle made in China here from our factory. Customized orders are welcome.

whatsapp

Phone

E-mail

Inquiry