Key Features

 

High-Torque 250cc Engine:

Forced liquid-cooled (or heavy-duty air-cooled) 4-stroke unit optimized for sustained pulling power under max load.

01

Reinforced Dual-Layer Chassis:

Cold-rolled steel box tubing (40 mm × 80 mm) with gusset plates at high-stress torsion nodes.

02

Floating Rear Axle:

Integrated booster reduction gearbox and heavy-duty differential for steep incline traction.

03

Drop-Side Cargo Bed:

All-steel corrugated box with removable side panels for multi-directional pallet or bulk loading.

04

Multi-Leaf Suspension:

Front hydraulic telescopic fork paired with rear multi-leaf spring packs (7+5 leaves) plus helper springs.

05

 

Applications

 

Agriculture:

Crop transport, fertilizer distribution, and feed hauling across unpaved terrain.

Municipal Sanitation:

Urban waste collection and park maintenance logistics.

250cc Twin‑Rear Cargo Tricycle

Construction:

Hauling bagged cement, bricks, and job-site debris through restricted access paths.

Rural Logistics:

Last-mile delivery in areas inaccessible to standard four-wheel trucks.

 

 

Technical Specifications

 

 

Technical Parameter

Specification

Engine Displacement

250cc, Single-cylinder, 4-stroke

Cooling System

Forced Liquid-cooled (Optional: Heavy-Duty Air-cooled)

Max. Payload Capacity

(Off-road) up to (Max Static / Paved)

Transmission

5-speed manual forward with reverse box (Optional: Dual-range sub-transmission)

Rear Axle Type

Full-floating rear axle with integrated booster differential

Brake System

Front hydraulic disc / Rear hydraulic drum with mechanical parking brake

Cargo Bed Dimensions

(Customizable up to )

Frame Material

High-tensile structural carbon steel Q345B

Tire Specification

Front: 5.00-12 / Rear: 5.00-12 or 5.50-13 commercial rib tires

Max. Speed

(Geared for torque over top speed)

Fuel Tank Capacity

(Steel tank with interior anti-rust coating)

 

Product Structure & Components

Rear Axle:

Ductile iron casing housing precision-machined ring and pinion gears against eccentric load distortion.

Front End:

Hydraulic Fork + 5.00-12 Commercial Tire + Hydraulic Disc Brake

Powertrain:

250cc Engine + Manual Transmission + Reverse Gearbox

Chassis:

Q345B Steel Box Tubing + Reinforced Gussets + Multi-Leaf Springs

Powertrain:

Constant-mesh transmission coupled to a reverse gearbox using hardened alloy steel gears.

Chassis:

Fabricated via robotic GMAW welding; shot-blasted and electrostatic powder-coated.

Cargo Bed:

2.0 mm cold-rolled corrugated steel flooring with welded crossmember channels.

 

Customization & OEM Solutions

 

Dimensions: Tailored cargo bed length and width for specific container or pallet footprints.

>>

Drivetrain: Selectable differential gear ratios and optional dual-range sub-transmissions.

>>

Cooling Options: Liquid-cooled for high-ambient climates or air-cooled for simplified maintenance.

>>

Branding: RAL color-matching, laser-etched VIN plates, and private-label manuals.

>>

Logistics Packaging: Optimized CKD/SKD configurations to minimize freight volume.

250cc Semi-Enclosed Adjustable Cargo Tricycle suppliers

 

Quality Control

Raw Material Testing: Ultrasonic thickness and chemical composition checks on incoming Q345B steel.
Welding Verification: Destructive tensile tests and magnetic particle inspection (MPI) on stress nodes.
Surface Durability: Cross-cut tape tests and 500 hours salt spray corrosion chamber testing.
Powertrain Bench Test: 100% hot/cold bench testing for engine compression and output stability.
End-of-Line Audit: Roller dynamometer simulation verifying braking, shifting, and steering alignment.

 

Packaging & Shipping

Configurations:

Available in CBU (frame crated), SKD, and CKD formats.

 

Container Loading:

Up to 18 units (SKD) or 40 units (CKD) per 40 ft High Cube container.

 

Protection:

Steel sub-frames, moisture barrier harness wraps, and anti-corrosion coating on machined surfaces.

 

 

 

FAQ

 

 

Q: What is the actual rated payload on unpaved roads?

A: 800 kg to ensure structural longevity and safe braking distances on rough terrain. Up to 1200 kg is supported under ideal flat paved conditions.

Q: Which cooling system should I choose for continuous heavy loads?

A: The liquid-cooled variant is recommended for high-temperature climates or sustained low-gear hill climbing to prevent power fade. The air-cooled variant suits moderate climates and simpler maintenance.

Q: What is the MOQ for custom dimensions or private branding?

A: 1 × 40 ft High Cube container (mixed SKD configurations accepted), which allows custom line setup and carton printing.

Q: How are replacement wear parts managed for overseas distributors?

A: A complimentary 3% spare parts kit (cables, brake pads, primary filters) is included per container. Full parts catalogs with exact OEM part numbers are provided for replenishment orders.

Q: What shipping and customs documents are supplied?

A: Commercial Invoice, Packing List, Bill of Lading, Certificate of Origin (CO/FORM E), and individual Manufacturer Certificates with VIN numbers. Local compliance coordination (such as EEC/DOT) is available upon request.

Q: Can the driveline handle extreme off-road gradients?

A: Yes. An optional mechanical sub-transmission adds a high/low range lever, doubling wheel-end torque for grades exceeding 25°.

 

modular-1
Request a Quote

Submit your project requirements to our engineering sales team:
Inquiry Checklist:
Target destination port
Quantity and format (CBU / SKD / CKD)
Cooling preference (Liquid / Air)
Customization requirements (if applicable)
[Submit RFQ / Contact Engineering Sales]

 

As one of the most professional 250cc loading tricycle manufacturers and suppliers in China, we offer a wide range of products with superior quality. Please feel free to wholesale advanced 250cc loading tricycle made in China here from our factory. Customized orders are welcome. 250cc Water cooled Heavy duty Cargo Tricycle, 3 Wheel Pickup Car, Extended Range Fuel Delivery Trike

whatsapp

Phone

E-mail

Inquiry